MV Agusta : Rivale 800

In MV Agusta, Otomotif on 24/10/2013 at 10:08


apik 🙂

Spesifikasi teknis :

Type                                                            Three cylinder, 4 stroke, 12 valve
Timing system                                             “D.O.H.C”
Total displacement                                       798 cm3 (48.7 cu. in.)
Compression ratio                                       13.3:1
Starting                                                       Electric
Bore x stroke                                               79 mm x 54.3 mm (3.1 in. x 2.1 in.)
Max. power –  r.p.m. (at the crankshaft)**           92 kW (125 hp) at 12.000 r.p.m.

Max. torque – r.p.m.                                     84 Nm (8.6 kgm) at 8.600 r.p.m.
Cooling system                                            Cooling with separated liquid and oil
Engine management system                        Integrated ignition – injection system MVICS
(Motor & Vehicle Integrated Control System)
with three injectors. Engine control unit
Eldor EM2.0, throttle body full drive by wire
Mikuni, pencil-coil with ion-sensing tech-
nology, control of detonation and misfire
Torque control with four maps, Traction
Control with eight levels of intervention
Electronic quick shift                                    MV EAS (Electronically Assisted Shift)
Clutch                                                         Wet, multi-disc
Transmission                                               Cassette style; six speed, constant mesh
Primary drive                                               19/36
Gear ratio
First gear:                                          13/37
Second gear:                                     16/34
Third gear:                                         18/32
Fourth gear:                                       19/30
Fifth gear:                                          21/30
Sixth gear:                                         22/29
Final drive ratio                                              16/41

Voltage                                                        12 V
Alternator                                                    350 W at 5000 r.p.m.
Battery                                                        12 V – 8.6 Ah
Wheelbase                                                  1410 mm (55,51 in.)
Overall length                                              2070 mm (81.50 in.)
Overall width                                                885 mm (34,84 in.)
Saddle height                                              881 mm (34.69 in.)
Min. ground clearance                                 142 mm (5.59 in.)
Trail                                                             104,5 mm (4.11 in.)
Dry weight                                                   178 kg (392.4 lbs.)
Fuel tank capacity                                       12,9 l (3.4 U.S. gal.)
Maximum speed*                                        245.0 km/h (153.1 mph)
Type                                                            ALS Steel tubular trellis
Rear swing arm pivot plates material           Aluminium alloy
Type                                                                   Marzocchi “UPSIDE DOWN” telescopic
hydraulic fork with rebound-compression
damping and spring preload external
and separate adjustment
Fork dia.                                                      43 mm (1.69 in.)
Fork travel                                                   150 mm (5.91in.)
Type                                                            Progressive Sachs, single shock
absorber with rebound and compression
damping and spring preload adjustment
Single sided swing arm material                   Aluminium alloy
Wheel travel                                                 130 mm (5.12 in.)

Front brake                                                  Double floating disc with Ø 320 mm
(Ø 12.6 in.) diameter, with steel braking
disc and flange
Front brake caliper                                       Brembo radial-type, with 4 pistons
Ø 32 mm (Ø 1.26 in.)
Rear brake                                                  Single steel disc with Ø 220 mm
(Ø 8.66 in.) dia.
Rear brake caliper                                       Brembo with 2 pistons – Ø 34 mm
(Ø 1.34 in.)
Front: Material/size                                      Aluminium alloy 3.50 ” x 17 ”
Rear: Material/size                                       Aluminium alloy 5.50 ” x 17 ”
Front                                                           120/70 – ZR 17 M/C (58 W)
Rear                                                            180/55 – ZR 17 M/C (73 W)
Material                                                       Thermoplastic


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: